lightray LR3 Spot Repair System
LightRay’s state-of-the-art Cast-in-Place-Pipe technology ushers the Trenchless industry into the twenty-first century, offering new opportunities for plumbers and municipal contractors by significantly reducing time and resources, lowering risks and costs with much faster and higher quality results compared to the older traditional thermal heat or ambient curing processes.
LIGHTRAY LR3
UV Spot Repairs
The new LightRay LR3 LED UV system is the most advanced UV cast in place pipe technology allowing the operator complete control of the curing process. Our patented, state-of-the-art technology can significantly reduce your costs and risks when compared to traditional thermo-setting or ambient-cured CIPP liners, creating new opportunities for plumbers and municipal contractors.
lightray = Better than all the rest
LightRay’s state-of-the-art Cast-in-Place-Pipe technology ushers the Trenchless industry into the twenty-first century, offering new opportunities for plumbers and municipal contractors by significantly reducing time and resources, lowering risks and costs with much faster and higher quality results compared to the older traditional thermal heat or ambient curing processes.
turn that drain cleaning call into
real profit
with an instant
10-minute solution
monthly payments are less
than the profit
from one install per month
zero down, no payments for 90 days
only $737 per month
Total cost: $35,000 - 60 months / 7.5% APR
- Same Day Repair
- Back in service within an hour
- Reduced ManPower
- Increased Profitability
average cost
$700
LR3 10ft repair
*labor, materials, incidentals
average customer price
$3,200
LR3 10ft repair
*includes sewer camera inspection, cleaning host pipe & lr3 10ft repair
gross profit of 78%
lightray lateral inversion
Perfect Cure in minutes
The LR3 is both a pull-in-place and push in place spot repair system giving you the flexibility to perform both operations by only changing the proprietary double-strand cold LED repair packer. The LightRay non-VOC resin is pre-impregnated into the high-performance fiberglass liner and shipped ready to install for no-dig small-diameter pipe infrastructure repairs. Once the install site is prepped, casting times as low as 10 minutes can be achieved eliminating the risk of premature or prolonged curing times due to temperature variations.
Repairs pipe diameters of 3-, 4- or 6-inches including transitions
features of lr3
- Repairs pipe diameters of 3-, 4- or 6-inches including transitions
- The 100-foot hose couples with 5-, 10- or 20-foot packers to perform repairs
- Casting times as low as 10 minutes
- Liner materials arrive ready to install
- Easily navigates 45 and 90⁰ bends
- Training included and 24/7 support
- Designed, built, and supported in the USA
a true cold LED double strand system
packer + liner + resin
The patented LightRay packers are a proprietary cold LED double-strand system offered in standard lengths of 5, 10 and 20 feet. Offered in diameters of 3, 4 and 6 inches, these UV packers require only 24-volts to cure and are protected and reinforced by a specialized silicone bladder for multiple uses and sustained durability.
The leading-edge navigation spring assists in going around bends and can house a radiofrequency device for location and tracking below ground or within walls and floors. In addition, the spring is removable allowing the hook to be exposed for all pull-in-place applications.
- Available in 3-, 4- and 6-inch diameters
- Double strand, cold LED lights for industry leading cure times
- Reinforced, multiple sized silicone bladders
- Leading edge removable spring guide exposes pull hook
- Specialized retrieval harness
- Quick disconnect system for easy packer switching
be up and running in minutes
ready to install
No more carrying hazardous materials in your truck or trailer and no need to measure and mix on site. LightRay liners arrive ready to install without any need for refrigeration. This greatly reduces the variability from mixing and preparing liners but also eliminates the requirement for extra equipment in the field allowing for rapid deployment of the system.
The LightRay LR3 system incorporates non-thermal UV casting resins along with high-strength flexible fiberglass pipe liners. No matter what the current temperature is above or below ground, the casting times are consistent anytime and every time, as low as 10 minutes.
- Resin impregnated liners in 3-, 4- and 6-inch diameters including transitional flex
- Cures in as low as 10 minutes
- No refrigeration necessary and a 6-month shelf life when stored in a controlled environment between 50-70 degrees
- Standard UV resins are non-VOC (no odor)
- Exceeds the structural requirements of ASTM F1216
- Sold in rolls of 50, 100 and 300 feet
did you know...
lightray is proudly made in the u.s.a.
The LightRay product line is completely designed, manufactured, built and supported in the United States of America! The quality is best in class and you can trust Waterline Renewal Technologies to be here for you if and when you need support on this system.
Made in the U.S.A. means a lot. We take great pride in manufacturing this ultraviolet lining system here in the United States. Our pride shows in the component quality & longevity of this new UV system.
dont wait... be one of the first in line
Now is your chance to take your sewer lateral lining game to the next level. Reserve your new LightRay LR3 system today and be the best sewer contractor you can be.
Offer your clients the very best in UV curing technologies.
