Protective coatings become necessary when biogenic corrosion is the problem such as industrial wastes. Biogenic corrosion is easily identified because it occurs where there is direct contact with the waste stream unlike MIC which occurs above the flows. Protective coatings require thorough cleaning and preparation of the damaged interior, plus proper and complete application of the coating. The Cor+Gard family of coatings provides chemical protection, ease of application and is highly resistant to a wide range of acid and temperatures (see chemical resistant chart).
Old surfaces are blasted clean to a sound substrate with our SpinWasher to remove any laitance that would interfere with adhesion followed with a ConmicShield® rinse to destroy any residual bacteria. For uniform, consistent and thorough coverage, Cor+Gard is applied from our bi-directional SpinCaster which eliminates pin holes and ensures proper application thickness. It may also be applied by brush, roller or spray gun. Cor+Gard is available in different formulations to match the specific project needs of chemical resistance and temperature.
Cor+Gard is fully compatible with PERMACAST® cementitous materials and together they form a composite of concrete and epoxy as they cure together.
Channel Line is used to quickly line manhole channels and benches in sewer systems. It provides corrosion protection, is rapid setting and moisture insensitive.
Cor+Gard B4 Primer is used for surface preparation prior to an expoxy application. It stands alone as a concrete sealer over damp and fresh masonry. It provides excellent resistance to chemicals, staining and solve
COR+GARD
Corrosion protection in sewer systems:
- Protection against hydrogen sulfide
- Quickly forms bond to freshly applied mortar
- Produces smooth, glossy, homogeneous layer
COR+GARD II
Corrosion protection in sewer systems:
- Protection against hydrogen sulfide
- Increased flexibility
- Quickly forms bond to freshly applied mortar
- Produces smooth, glossy, homogeneous layer
COR+GARD 301
Corrosion protection in sewer systems:
- Protection against hydrogen sulfide
- 3 to 1 ratio
- Increased tensile strength
- Quickly forms bond to freshly applied mortar
- Produces smooth, glossy, homogeneous layer
COR+GARD 501
Corrosion protection in sewer systems:
- NOVOLAC based epoxy
- Provides excellent resistance to concentrated sulfuric acid
CHANNEL LINE
Corrosion protection in sewer systems:
- Quickly line manhole channels and benches
- Rapid setting, high strength
- Moisture insensitive
COR+GARD B4 PRIMER
Surface preparation prior to epoxy application:
- New solvent-free technology
- Excellent sealing over fresh concrete and damp masonry
- Stands alone as a concrete sealer
- Excellent resistance to chemicals, staining, & solvents
- Increased window of main coating application
