Specifications
1.01 - Tandem Axle Trailer:
- Capacity: 14,000 lb GRWR 14,000 lb GAWR
- Deck Width: 83 Inches
- Deck Length: 20 feet
- Standard Features:
- 2 5/16” Ball Coupler Hitch or Lunette Eye with Heavy Duty Safety Chains.
- 6 Way Plug and Loom.
- 7” Channel Frame and Tongue
- Break-Away Kit with Battery
- Stake Pockets & D-Rings
- Two-Inch Treated Pine Floor.
- Leaf Spring Suspension.
- Solid Braced Teardrop Fenders.
- 16” Radial Tires, 8 Bolt Hub, White Steel Spoke Wheels.
- Spare Tire and Carrier. Reflective Marker Tape installed on trailer.
- Department of Transportation Compliant Lighting.
- 10,000 lb. Spring Assisted Jack
- Acid Etched with White Phosphorus, Primed with Auto Grade Primer.
- Painted with Acrylic Enamel with Reflective Pinstripe. (White)
- Pallet Platform for Easy Mortar Loading and Storage.
1.02 - Application Equipment and Appurtenances
- MORTAR MIXER
- 45 gallon mixing tank with a 15 gallon holding hopper
- Vaiable speed high-efficiency paddle mixer
- Automatic water metering device, allowing up to 20 GPM
- MORTAR MIXER SPECIFICATIONS
- Capacity, cu. ft.: 6.02
- Capacity, bags: 120 bags per hr
- Weight, lbs. (kg): 795 (360.61)
- Drive: Hydraulics powered by 33HP electric start Kubota turbo diesel
- Dump Action: Slide Gate
- PUMP
- The pump is a progressive cavity pump, hydraulically powered.
- The pump is outfitted with a low-pressure spray gun, quick connect material hoses and quick connect air hoses.
- PUMP SPECIFICATIONS
- Capacity: Up to 64.17 Cubic ft per hr
- Power Source: Hydraulics powered by 33HP electric start Kubota turbo diesel
- Weight, lbs. (kg): 795 (360.61)
- Hand application mortar gun.
- Adjustable crane arm with electric retrieval winch.==
- Two (2) twenty five (25) foot sections of 1” reinforced mortar hose – with quick connect fittings.
- Two (2) twenty five (25) foot sections of ½” air supply hose with quick connect fittings.
- All gauges sealed and liquid filled units.
- Modular in-line air filter/lubrication unit (for all air components).
- Forward/reverse air control valve for robotic applicator.
- Air controls – all air controls will be mounted for ease of operation.
- Air lock system to clean and flush lines.
- Support Equipment:
- VanAir Viper 80cfm Air Compressor
- Pressure washer with either Honda engine or hydraulic
- 250 gallon water supply tank, Pressurized on demand water system, delivers 3.9 GPM @ 45 psi.
- Pressure washer cleaning head - 60 feet, 4000 psi steel reinforced hose with quick coupler, 360 degree rotating washer head with hyper blast nozzles.
- Tool box storage - One (1) 18” x 18” x 36” steel with locks.
- Optional Equipment:
- Plural component high solids epoxy pump for high volume epoxy
- External lighting package.
- Additional toolbox storage